US UK DE FR ES IT RU
P-tank1%2bp-tank2.example.1

For ultra-sturdy combined walls (Peiner-type beams) with Larssen Z/AZ sheet piles

fits

  • Larssen AZ

works with

AZ 12, 13, 14, 17, 18, 19, 25, 26, 27, 34, 36, 38, 46, 48, 50

steel grade
ASTM Grade 50 or better,
MARINER™ steel
weight
~ 17.10 lb/ft
thickness
0.47 in

downloads

Need To Build a Combined Wall?

The Combined Sheet Pile Tool on iSheetPile.com can help.


Installation

  1. Install the Peiner Beams first.
  2. Lay the sheet piling horizontally and thread the connector into the interlock of the sheet piling, adjusting the connector to the appropriate position (please review the proper interlocking examples).This can be done at the mill, at a distributor’s yard, or on the job site (go here: www.pilepro.com/thread).
  3. Tack or spot-weld the connector in place. Typically, a ~250mm (~10”) weld attaching the connector to the sheet pile to the top is sufficient.
  4. Grasp the sheet pile (with connectors already attached) and thread between the already installed Peiner type beams.
  5. Lower/drive the sheet piling to the level of the Peiner type beam.

PilePro® connectors are exclusively supplied through PilePro Steel, LP.
866-666-7453 | info@pilepro.com