Womswofs.hero 1415370743

USE:
* For O-Pile:DTH systems using Down-the-Hole in difficult driving conditions; only SSP system that can be driven into solid rock.

fits

  • pipe
steel grade
ASTM Grade 50/60,
ASTM A690 MARINER® steel
thickness

12mm

other

WOM S WEIGHT:
~ 2.4 lb/ft
~ 3.8 kg/m

WOF S WEIGHT:
~ 7.5 lb/ft
~ 11.2 kg/m

Combined Connector Weight:
~ 9.9 lb/ft
~ 15.0kg/m

Combined Connector Width:
62mm; 2.44"

Connector Thickness:
12mm.47"

O-Pile Interlock Strength:
19.5 kips/inch (3418 kN/m)


General weld guidelines for connectors

  1. All seams have a = 6 mm (~.236”).
  2. Both sides have a tip and toe welding continuously of 500 mm (~20.0”).
  3. Both sides are tack welded in the free length between tip and toe welding with 200 mm/m (~8”/3.28’). The distance from seam to seam is 800 mm (~31.5”) or less.
  4. In salt water the water side is continuously welded on the whole pile length. Rear side is as above in step #3.

Note: the above is for references purposes only and the welding design must be checked against other considerations such as anchor forces, shear forces and otherwise difficult driving conditions.