Shape 1391102661

USES:

• 2-way connections with angles up to
20° -160° for AZ/NZ/EZ/Hoesch, most Cold Formed

• Omega corner

• 3-way flexible connections with
direction changing

NOTE: PRODUCT COVERS 90% OF
AZ/HOESCH CONNECTOR NEEDS

fits

  • cold formed
  • Larssen AZ

works with

AZ 12-770, AZ 13, AZ 13-770, AZ 14-770, AZ 17, AZ 17-700, AZ 18, AZ 18-700, AZ 19, AZ 19-700, AZ 24-700, AZ 25, AZ 26, AZ 26-700, AZ 28, AZ 28-700, AZ 36-700N, AZ 38-700N, AZ 40-700N, AZ 42-700N, AZ 44-700N, AZ 46, AZ 46-700N, AZ 48, AZ 50, EZ 18, EZ80, EZ88, EZ95, H 1807, H 2507, H 2607, H 2707, H 2807, H 3907, MSZ18 312, MSZ18 340, MSZ18 350, MSZ18 375, MSZ18 406, MSZ19 340, MSZ19 350, MSZ19 375, MSZ19 406, NZ 19, NZ 21, SKZ 20, SKZ 22, SKZ 23, SKZ 24, SKZ 25, SKZ 31, SKZ 33, SKZ 34, SKZ 36, SKZ 38, XZ100, XZ105, XZ85, XZ90, XZ95

steel grade
ASTM Grade 50/60,
ASTM A690 MARINER® steel
weight
~ 12.20 lb/ft

Need To Build a Sheet Pile Wall?

Configure a Solution on iSheetPile.com.


Installation

  1. Please review the proper interlocking examples that are listed.
  2. Thread the connector into the interlock while the sheet pile is out of the ground.
  3. Adjust the connector to the appropriate position.
  4. Tack or spot-weld the connector in place. Typically, a ~250mm (~10") weld attaching the connector to the sheet pile to the top is sufficient.
  5. Drive/extract the sheet pile (with the connector attached) as you would normally.


You are viewing products for region: North America (change)