Swc30a 1415287755


* For 30° Y-connections, offers long
lasting connection, due to the fact there is no structural weld

NOTE: Design shown made to fit PS31
and PS27.5 (similar connectors available
for other Flat Sheet Pile types, please

works with

PS 27.5, PS 31

steel grade
ASTM Grade 50/60,
ASTM A690 MARINER® steel
~ 37.89 lb/ft
~ 56.5 kg/m

In stock (or comparable product).

Place an order »



  1. Please review the proper interlocking examples that are listed.
  2. Thread the connector into the interlock while the sheet pile is out of the ground.
  3. Adjust the connector to the appropriate position.
  4. Tack or spot-weld the connector in place. Typically, a ~250mm (~10") weld attaching the connector to the sheet pile to the top is sufficient.
  5. Drive/extract the sheet pile (with the connector attached) as you would normally.