Cft 1415287770

USES:

• 3-way T-connection

• 90° connection with angles up to 20°-160° for most Cold Formed shapes

works with

EZ80, EZ88, EZ95, JZ112, MSZ18 312, MSZ18 340, MSZ18 350, MSZ18 375, MSZ18 406, MSZ19 340, MSZ19 350, MSZ19 375, MSZ19 406, PAZ-CF 4460, PAZ-CF 4470, PAZ-CF 5460, PAZ-CF 5470, PAZ-CF 5480, PAZ-CF 5560, PAZ-CF 5570, PAZ-CF 5580, SCZ 14, SCZ 16, SCZ 17, SCZ 18, SCZ 19, SCZ 21, SCZ 22, SCZ 23, SCZ 25, SCZ 26, SCZ 29, SCZ 30, XZ100, XZ105, XZ85, XZ90, XZ95, Z 55, Z 60, Z 65, Z 70, Z 75

steel grade
ASTM Grade 50/60,
ASTM A690 MARINER® steel
weight
~ 17.07 lb/ft
~ 25.4 kg/m

Can be produced in 6 to 10 weeks.

downloads

Need To Build a Sheet Pile Wall?

Configure a Solution on iSheetPile.com.


Installation

  1. Please review the proper interlocking examples that are listed.
  2. Thread the connector into the interlock while the sheet pile is out of the ground.
  3. Adjust the connector to the appropriate position.
  4. Tack or spot-weld the connector in place. Typically, a ~250mm (~10") weld attaching the connector to the sheet pile to the top is sufficient.
  5. Drive/extract the sheet pile (with the connector attached) as you would normally.