Shape 1391102661

USES:

• 2-way connections with angles up to 20° -160° for AZ/NZ/EZ/Hoesch, most Cold Formed

• Omega corner

• 3-way flexible connections with
direction changing

NOTE: PRODUCT COVERS 90% OF
AZ/HOESCH CONNECTOR NEEDS

fits

  • cold formed
  • Larssen AZ
steel grade
ASTM Grade 50/60,
ASTM A690 MARINER® steel
weight
~ 12.20 lb/ft
~ 18.2 kg/m

In stock (or equivalent product).

Place an order »

downloads

Need To Build a Sheet Pile Wall?

Configure a Solution on iSheetPile.com.


Installation

  1. Please review the proper interlocking examples that are listed.
  2. Thread the connector into the interlock while the sheet pile is out of the ground.
  3. Adjust the connector to the appropriate position.
  4. Tack or spot-weld the connector in place. Typically, a ~250mm (~10") weld attaching the connector to the sheet pile to the top is sufficient.
  5. Drive/extract the sheet pile (with the connector attached) as you would normally.