USDEJP

Womxl 1393592101

For continuous and combined O-Pile systems. Width = 92mm.

Note: Female and male connectors, either the same or different size, can be combined to create a desired width.

fits

  • PZ/PZC
  • pipe

works with

PZ 22, PZ 27, PZ 35, PZ 40, PZC 13, PZC 14, PZC 18, PZC 19, PZC 25, PZC 26, PZC 28

steel grade
ASTM Grade 50/60,
ASTM A690 MARINER® steel
weight
~ 8.50 lb/ft
Opile catalog cover small

Need To Build a Combined Wall?

The Combined Sheet Pile Tool on iSheetPile.com can help.


General weld guidelines for connectors

  1. All seams have a = 6 mm (~.236”).
  2. Both sides have a tip and toe welding continuously of 500 mm (~20.0”).
  3. Both sides are tack welded in the free length between tip and toe welding with 200 mm/m (~8”/3.28’). The distance from seam to seam is 800 mm (~31.5”) or less.
  4. In salt water the water side is continuously welded on the whole pile length. Rear side is as above in step #3.

Note: the above is for references purposes only and the welding design must be checked against other considerations such as anchor forces, shear forces and otherwise difficult driving conditions.


Wom xl+wof xl.01
Wom xl+wof xl.02
Wom xl+wof xl.03
Wom xl+wof xl.04
Wom xl+wof xl.05
Wom xl+wof xl.06
Wom xl+wof xl.07
Wom xl+wof xl.08
Wom xl+wof xl.09
Wom xl+wof xl.10

Continuous O-Pile Systems

Combined O-Pile Systems with Larssen Interlock

Combined O-Pile Systems with Cold Formed Interlock

Combined O-Pile Systems with Ball & Socket Interlock